新拌混凝土气泡参数分析法评估混凝土抗冻性

通过对国内外资料分析,指出了新拌混凝土气泡参数分析法评估混凝土抗冻性技术是快速无损预控混凝土抗冻性的发展方向,对抗冻混凝土施工具有前瞻性的指导意义。     

超大跨度双跨钢桁梁悬索桥动力特性分析和模态试验

以跨径布置460 m+1480 m+491 m的一座双跨钢桁梁悬索桥结构为工程背景,充分考虑结构几何非线性效应、大位移非线性效应等因素的影响,建立了算例桥梁的MIDAS空间有限元分析模型,对基本动力特性进行了仿真分析和结构振动试验测试;对成桥结构进行动力特征参数测试,并与理论计算值进行了对比分析,该桥实测动力特征参数与对应理论计算值基本吻合,且测试值大于理论计算值,这表明成桥结构实测刚度大于理论设计目标值。     

大跨度空腹式连续刚构桥设计理论与方法

为寻求常规连续刚构桥适用跨径和斜拉桥适用跨径之间的合理、经济桥型,在常规连续刚构桥的基础上结合拱桥的力学特点提出空腹式连续刚构桥型。该桥型在常规连续刚构桥的形式上加大箱梁根部高度,并对箱梁根部的腹板进行挖空,减轻自重,形成梁-拱组合力学效应,从而提高结构承载效率,增强桥梁跨越能力。空腹式连续刚构桥可布置为单主跨、多主跨以及单T的形式,也可与常规连续刚构组合,桥墩可采用双肢薄壁墩或箱形柱式墩。采用正交试验法对该桥型关键结构参数进行研究,并根据实际工程对总体结构参数取值提出建议。该桥型采用平衡悬臂方法施工,工程造价指标、运营维护技术要求及费用与常规连续刚构桥相当,适用跨径在200~400 m,可望填补常规连续刚构桥适用跨径和斜拉桥适用跨径之间的空白。     

Multiaxial stress creep rupture mechanisms of AZ31 magnesium alloy

The maximum principal stresses, von Mises effective stresses and principal facet stresses at the time of creep rupture were compared in uniaxial, biaxial, and triaxial stress states for AZ31 magnesium alloy. The creep rupture of this alloy was experimentally controlled by cavitation, which was the result of a low damage tolerance, λ. Creep deformation could be correlated with the von Mises effective stress parameter. The failure-mechanism control parameter governing the stress state coincided with the experimental results of the rupture of the materials under multiaxial stress states. Finally, the theoretical prediction based on constrained cavity growth and continuous nucleation agreed with the experimental rupture data to within a factor of three.     

Influence of polygonal wear of railway wheels on the wheel set axle stress

The coupled vehicle/track dynamic model with the flexible wheel set was developed to investigate the effects of polygonal wear on the dynamic stresses of the wheel set axle. In the model, the railway vehicle was modelled by the rigid multibody dynamics. The wheel set was established by the finite element method to analyse the high-frequency oscillation and dynamic stress of wheel set axle induced by the polygonal wear based on the modal stress recovery method. The slab track model was taken into account in which the rail was described by the Timoshenko beam and the three-dimensional solid finite element was employed to establish the concrete slab. Furthermore, the modal superposition method was adopted to calculate the dynamic response of the track. The wheel/rail normal forces and the tangent forces were, respectively, determined by the Hertz nonlinear contact theory and the Shen–Hedrick–Elkins model. Using the coupled vehicle/track dynamic model, the dynamic stresses of wheel set axle with consideration of the ideal polygonal wear and measured polygonal wear were investigated. The results show that the amplitude of wheel/rail normal forces and the dynamic stress of wheel set axle increase as the vehicle speeds rise. Moreover, the impact loads induced by the polygonal wear could excite the resonance of wheel set axle. In the resonance region, the amplitude of the dynamic stress for the wheel set axle would increase considerably comparing with the normal conditions.     

斜拉桥断索分析中破断拉索位置的参数分析

采用ANSYS软件建立某双塔斜拉桥的有限元模型,计算全桥不同位置斜拉索的突然破断对剩余结构造成的动力响应,通过对比,获取造成最大动力响应的斜拉索位置。同时,对破断拉索位置进行参数分析,找出断索分析中的关键拉索,所得结论期望用于工程设计中的断索工况校核。     

城市公交线路模态工况构建方法研究

采用GPS设备对西安城市公交典型线路的运行工况进行实测,分别运用瞬态转模态方法和多目标优化法构建出城市客车模态工况。以8个特征参数相对误差为标准,对两种方法的精度进行了对比研究。研究表明,两种方法均能有效地完成工况构建,其中多目标优化法精度最高,瞬态转模态方法简单快捷,从而为工况构建方法的选取提供了思路和数据验证。     

整体式无碴轨道（RADAR2000）螺杆调节器的研制与应用

介绍了螺杆调节器的构成，技术参数，安装及现场应用情况。     

RV传动设计绘图系统的开发

论述了开发ＲＶ传动系列产品的志科软件所采用的方法和所解决的几个关键技术问题，章就应用面向对象技术建立功能参数先导驱动的参数化设计系统的结构模型、用窗口遮盖和装配因子实现等价匠拼装技术以及设计参数的正确组织与管理等作了较深扩的探讨。